78 ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-01
Content aware cache switching
2
state machine to track HTTP request/response transactions. Every HTTP request will be analyzed
and forwarded according to the CSW configuration. When CSW makes a decision to switch from
one server to another server, it will send a TCP reset to the previously chosen server and establish
a TCP connection to the newly selected server
Disabling HTTP Keep Alive mode
HTTP keep-alive mode is the default mode for TCS CSW. You can disable keep-alive to return the
ServerIron ADX to HTTP 1.0 mode which was supported in releases prior to 12.4.00 as shown.
ServerIronADX(config)# server cache-group 1
ServerIronADX(config-tc-1)# no-keep-alive
Syntax: [no] no-keep-alive
Use the no parameter to re-enable HTTP keep alive if you have disabled it.
Displaying HTTP keep alive statistics
You can use the show server proxy keep-alive command to display HTTP keep alive statistics. The
statistics relevant to HTTP keep alive are shown (in bold) in the abbreviated output below and
described in Table 5.
Komentáře k této Příručce